Akai GXC-730 D

Track System: 4 Track 2 Channel Stereo System

Tape: Philips Type Cassette

Tape Speed: 1-7/8 ips

Wow & Flutter: Less than 0.08% WRMS (NAB), 0.24% (DIN 45507)

Frequency Response

35 to 14,000 Hz ±3 dB using LN tape

35 to 16,000 Hz ±3 dB using CrO2 (SA) tape

35 to 17,000 Hz ±3 dB using FeCr tape

Distortion (1,000 Hz "0" VU): Less than 1.5% using LN tape

Signal to Noise Ratio: Better than 50 dB using LN tape (measured via tape with peak recording level of +3 VU)

Dolby NR switch On: Improves up to 10 dB above 5 kHz

Erase Ratio: Better than 70 dB

Bias Frequency: 100 kHz

Heads

1 GX recording/playback Head for forward and reverse direction

2 Erase Heads

Motor: 4-pole hysteresis synchronous Motor

F.F. & Rewind Time: 70 sec. using a C-60 cassette tape

Output Jacks

Line (2): 0.775 V (0 VU); required load impedance more than 20 k ohms

Phone (1): 50 mV/8 ohms

Input Jacks

Microphone (2): 0.3 mV/4.7 k ohms; required microphone impedance 600 ohms

Line (2): 70 mV/100 k ohms

DIN Jack

Input: 3 mV/25 k ohms

Output: 0.55 V; required load impedance more than 20 k ohms

Semi-conductors: Transistors 56; Diodes 121; Ic`s 2

Power Requirements: 220 V, 50 Hz switchable

Dimensions: 440x175x302 mm

Weight: 12 kg